Uneeda Bolt & Screw Co., Inc.® supplies lag shield anchors, double expansion shield anchors, single expansion shield anchors, hollow wall anchors, nail drive anchors, e-z anchors, plastic toggle anchors, conical anchors with or without fins, wedge anchors and sleeve anchors.

We stock bulk quantities of anchors in our warehouse that are ready for shipment. If you are looking for an anchor not listed, we will find it for you.  Feel free to call us 800-535-2800.

CONICAL PLASTIC: Used primarily for light duty fastening in concrete, brick, masonry or drywall.  The conical anchors ridged body helps eliminate spinning while the screw is inserted.	CONCIAL WITH FINS PLASTIC: Used for making lightweight attachments in concrete, solid block, drywall, plaster, and wallboard.  Horizontal fins prevent anchor from turning during installation.	DOUBLE EXPANSION SHIELD: Consists of twin tubular sleeves bound together with a high tension spring steel band, which contain two protruding wedge shaped hollow cones.  Ideal for high sheer loads, or in situations where bolt is subject to side pressure or vibration.
E-Z SELF DRILLING ZINC: For use in gypsum wallboard.  Fast installation with no pre-drilling:  use #2 Phillips bit.  The tri-cut point drills a small hole and seats flush.  To remove, back it out of wallboard using a screwdriver.	HOLLOW WALL TYPE S: Designed to be used in thin materials or on hollow walls.  They have a unique way of spreading within the hollow of the wall.  Once spread, the anchor cannot be pulled back through the smaller installation hole.  The strength of a spreading anchor is proportional to the size of the "spread.”	HOLLOW WALL DRIVE TYPE SD: Sleeve type anchors commonly used to mount fixtures to hollow walls.  Prongs under the flange pierce the mounting surface to prevent anchor rotation as its screw is tightened. Screw may be removed and replaced without affecting the anchor.
LAG SHIELD: A tubular shield comes in both long and short lengths. They are medium duty anchors that can be used in concrete and cement blocks. Needs to be used with a Lag Bolt.	MUSHROOM NAIL DRIVE: Contains a low profile mushroom head style that works in concrete, block and brick.  Fast, easy installation through material needed to be fastened.	PLASTIC TOGGLE: Provides secure holding power for light and medium loads in all walls.  The anchor locks on walls an ceilings in its grip range for vibration-proof holding.
SINGLE EXPANSION SHIELD:  A one-piece design, made of zinc alloy, is entirely rustproof.  Common uses include:  fastening into rock, concrete, brick and block.  The shield uses a standard machine threaded bolt or screw.  Its holding power is unaffected if the bolt is removed and replaced.	SLEEVE: Side Bearing Anchor. These work well in older concrete, close to an edge or concrete block.	WEDGE: Their design allows them to anchor fixtures into concrete.  Concrete wedge anchors work by inserting them into a hole drilled into concrete.  The concrete wedge anchor is then expanded, wedging itself securely in the concrete.